Mac Os X Software Update Download Extra Quality Location

Mac Os X Software Update Download Extra Quality Location

Download File - https://shurll.com/2t7LSW

We run a small office with approx 10 Macs all running Big Sur. Whenever a new version of macOS comes out we can download the installer once and then reuse it on every machine, but now I'm trying to simplify the update process since, e.g., 11.3.1 which came out recently is 5.7gb and I would like to avoid downloading it 10 times as we have a slow and also metered Internet connection.

As this is one of the firsts results in search engines, it deserves an answer:Big Sur updates are downloaded in /System/Library/AssetsV2/, more precisely in /System/Library/AssetsV2/com_apple_MobileAsset_MacSoftwareUpdate/

I wish I had a better answer for you. Unfortunately, Apple has chosen to deprecate softwareupdate and discontinue Combo Updaters, which makes this situation extremely difficult to manage, especially with bandwidth restrictions.

If you have a few Mac computers in your household or office, you probably don't want to spend hours downloading the large macOS installation file multiple times. But Apple doesn't save the macOS installer in an obvious location, so it's difficult to use the same file again.

If you want to use the macOS installer multiple times, and you don't save it first, you need to download it again on each Mac you update. This takes a long time to do and sucks up your internet bandwidth in the process, as each download could take two hours or more.

To make matters even worse, if you download the latest macOS update as soon as Apple makes it available, download times are likely to be even slower while Apple's servers struggle to keep up with initial demand.

You can save yourself a lot of hassle by saving the macOS installer after downloading it the first time. That way, you can use the same macOS installer to update as many Mac computers as you need without multiple downloads.

Anytime you update your iPhone, iPod touch, or iPad, via a Mac or PC and using Finder or iTunes, you will get a new IPSW file that is downloaded to an iOS or iPadOS updates folder. Knowing where these IPSW firmware files are located can be helpful when troubleshooting, and when accessing an IPSW for manual updating, a downgrade, or even for jailbreak purposes.

For macOS (all versions, including macOS Big Sur, Catalina, Mojave, Sierra, Mac OS X El Capitan, etc), whether you use iTunes or Finder to update an iPhone or iPad with new iOS or ipadOS versions, the IPSW file will be located at the following location:

The new macOS update installer can be deleted and space can be recovered if it is downloaded automatically by your Mac. Navigate to the bottom left corner of your screen and click the Finder icon. If you prefer, you can drag the app icon to the Trash on the Dock.

In my experience, Apple macOS updates are cumulative in downloads. Meaning when you closed the lid on your MacBook all that happened is the download was suspended. It will not start from square one again. It will simply continue the download where it left off. And since the Big Sur update package is around 15GB, you now have 12GB downloaded so all you need to do is wait for the remaining 3GB to download and you should be good.

Variable: COMMAND_LINE_INSTALL Set when downloading or installing using the softwareupdate command. Scripts can check for the existence of this variable to determine if they are executing in a command line environment (i.e. theremay be no WindowServer available).

Package binaries for R versions older than 3.2.0 are only available from the CRAN archive so users of such versions should adjust the CRAN mirror setting ( -archive.r-project.org) accordingly.R 4.2.2 "Innocent and Trusting" released on 2022/10/31 Please check the integrity of the downloaded package by checking the signature: pkgutil --check-signature R-4.2.2.pkg in the Terminal application. If Apple tools are not avaiable you can check the SHA1 checksum of the downloaded image: openssl sha1 R-4.2.2.pkgLatest release:R-4.2.2-arm64.pkg (notarized and signed)SHA1-hash: c3bb657ca6912b9b98e254f63434a365da26848f(ca. 86MB) for M1 and higher Macs only! R 4.2.2 binary for macOS 11 (Big Sur) and higher, Apple silicon arm64 build, signed and notarized package. Contains R 4.2.2 framework, R.app GUI 1.79 for Apple silicon Macs (M1 and higher), Tcl/Tk 8.6.12 X11 libraries and Texinfo 6.8. Important: this version does NOT work on older Intel-based Macs - see below for Intel version.Note: the use of X11 (including tcltk) requires XQuartz (version 2.8.1 or later). Always re-install XQuartz when upgrading your macOS to a new major version.This release uses Xcode 13.1 and experimental GNU Fortran 12 arm64 fork. If you wish to compile R packages which contain Fortran code, you may need to download GNU Fortran for arm64 from -project.org/tools. Any external libraries and tools are expected to live in /opt/R/arm64 to not conflict with Intel-based software and this build will not use /usr/local to avoid such conflicts (see the tools page for more details). R-4.2.2.pkg (notarized and signed)SHA1-hash: 99b8d184f855e630ac950ca4e62cb7fc9a1f7b2e(ca. 87MB) for Intel Macs R 4.2.2 binary for macOS 10.13 (High Sierra) and higher, Intel 64-bit (older Macs) build, signed and notarized package. Contains R 4.2.2 framework, R.app GUI 1.79 in 64-bit for Intel Macs, Tcl/Tk 8.6.6 X11 libraries and Texinfo 6.7. The latter two components are optional and can be ommitted when choosing "custom install", they are only needed if you want to use the tcltk R package or build package documentation from sources.Note: the use of X11 (including tcltk) requires XQuartz to be installed (version 2.7.11 or later) since it is no longer part of macOS. Always re-install XQuartz when upgrading your macOS to a new major version.This release supports Intel Macs, but it is also known to work using Rosetta2 on M1-based Macs. For native Apple silicon arm64 binary see above.Important: this release uses Xcode 12.4 and GNU Fortran 8.2. If you wish to compile R packages from sources, you may need to download GNU Fortran 8.2 - see the tools directory. NEWS (for Mac GUI)News features and changes in the R.app Mac GUIMac-GUI-1.78.tar.gz SHA1-hash: 23b3c41b7eb771640fd504a75e5782792dddb2bcSources for the R.app GUI 1.78 for macOS. This file is only needed if you want to join the development of the GUI (see also Mac-GUI repository), it is not intended for regular users. Read the INSTALL file for further instructions.Note: Previous R versions for El Capitan can be found in the el-capitan/base directory.Binaries for legacy OS X systems: R-3.6.3.nn.pkg (signed) SHA1-hash: c462c9b1f9b45d778f05b8d9aa25a9123b3557c4 (ca. 77MB) R 3.6.3 binary for OS X 10.11 (El Capitan) and higher, signed package. Contains R 3.6.3 framework, R.app GUI 1.70 in 64-bit for Intel Macs, Tcl/Tk 8.6.6 X11 libraries and Texinfo 5.2. The latter two components are optional and can be ommitted when choosing "custom install", they are only needed if you want to use the tcltk R package or build package documentation from sources. R-3.3.3.pkgMD5-hash: 893ba010f303e666e19f86e4800f1fbfSHA1-hash: 5ae71b000b15805f95f38c08c45972d51ce3d027(ca. 71MB)R 3.3.3 binary for Mac OS X 10.9 (Mavericks) and higher, signed package. Contains R 3.3.3 framework, R.app GUI 1.69 in 64-bit for Intel Macs, Tcl/Tk 8.6.0 X11 libraries and Texinfo 5.2. The latter two components are optional and can be ommitted when choosing "custom install", it is only needed if you want to use the tcltk R package or build package documentation from sources.Note: the use of X11 (including tcltk) requires XQuartz to be installed since it is no longer part of OS X. Always re-install XQuartz when upgrading your OS X to a new major version. R-3.2.1-snowleopard.pkgMD5-hash: 58fe9d01314d9cb75ff80ccfb914fd65SHA1-hash: be6e91db12bac22a324f0cb51c7efa9063ece0d0(ca. 68MB)R 3.2.1 legacy binary for Mac OS X 10.6 (Snow Leopard) - 10.8 (Mountain Lion), signed package. Contains R 3.2.1 framework, R.app GUI 1.66 in 64-bit for Intel Macs.This package contains the R framework, 64-bit GUI (R.app), Tcl/Tk 8.6.0 X11 libraries and Texinfop 5.2. GNU Fortran is NOT included (needed if you want to compile packages from sources that contain FORTRAN code) please see the tools directory.NOTE: the binary support for OS X before Mavericks is being phased out, we do not expect further releases! The new R.app Cocoa GUI has been written by Simon Urbanek and Stefano Iacus with contributions from many developers and translators world-wide, see "About R" in the GUI.Subdirectories: tools Additional tools necessary for building R for Mac OS X:Universal GNU Fortran compiler for Mac OS X (see R for Mac tools page for details). base Binaries of R builds for macOS 10.13 or higher (High Sierra), Intel build contrib Binaries of package builds for macOS 10.13 or higher (High Sierra), Intel build big-sur-arm64 Binaries for macOS 11 or higher (Big Sur) for arm64-based Macs (aka Apple silicon such as the M1 chip) el-capitan Binaries of package builds for OS X 10.11 or higher (El Capitan build) mavericks Binaries of package builds for Mac OS X 10.9 or higher (Mavericks build) old Previously released R versions for Mac OS X You may also want to read the R FAQ and R for Mac OS X FAQ. For discussion of Mac-related topics and reporting Mac-specific bugs, please use the R-SIG-Mac mailing list.Information, tools and most recent daily builds of the R GUI, R-patched and R-devel can be found at -project.org/. Please visit that page especially during beta stages to help us test the macOS binaries before final release!Package maintainers should visit CRAN check summary page to see whether their package is compatible with the current build of R for macOS.Binary libraries for dependencies not present here are available from -project.org/bin and corresponding sources at -project.org/src.Last modified: 2022/10/31, by Simon Urbanek 2b1af7f3a8